language versions PL
Search in products (min. 2 characters)
Pomiń łącza nawigacji

Conventional punching

ECCENTRIC PRESSES IN THE RANGE 16-500 t

  • press load 160 kN - 5000 kN
  • table sizes from 500 x 330 to 1400 x 2450 mm - 9 presses

We have the following additional equipment for presses:

pneumatic feeder HERRBLITZ Z3 for coil sheets

  • max. tape width 305 mm
  • max. tape thickness 2,5 mm
  • max. drawing load 108 kg
  • stroke 300 mm
  • fixed clamping force 126 kg
  • movable clamping force 604 kg
  • max feed rate: 60 cycles/min at full stroke

pneumatic feeder HERRBLITZ 2TV4 for coil sheets

  • max. tape width 460 mm
  • max. tape thickness 2,0 mm
  • max. drawing load 430 kg
  • stroke 400 mm
  • fixed clamping force126 kg
  • movable clamping force 1208 kg
  • max feed rate: 40 cycles/min at full stroke

pneumatic feeder HERRBLITZ TZ3 for coil sheets and wires

  • max. tape width 305 mm
  • max. tape thickness 3,05 mm
  • mmax. wire diameter Ø8
  • max. drawing load 324 kg
  • stroke 300 mm
  • fixed clamping force 126 kg
  • movable clamping force 1208 kg
  • max feed rate: 60 cycles/min at full stroke

11-roll straightener for coil sheets

  • max. tape width 460 mm
  • max. tape thickness 5 mm
Conventional punching - eccentric press in the pressure range 25 ton
Conventional punching - eccentric press in the pressure range 100 ton
Conventional punching - eccentric press in the pressure range 25 ton
Conventional punching - eccentric press in the pressure range 16 ton

We have the ability to design 3D and produce tooling (punching dies, stamping dies) for presses. The equipment is made in our own modern tool room.

Tool for punching
Tool for punching and stamping

copying photos and descriptions (in whole or in part) WITHOUT the consent of the owner and administrator of the site IS FORBIDDEN. Copyright © JOTKEL Krotoszyn 1996-2024

Cooperation | Conventional punching

Sitemap

JOTKEL Jan Krzywonos Sp.k. with headquarters in 63-700 Krotoszyn, ul. Wiejska 43, registered in the District Court in Poznań Nowe Miasto i Wilda, IX Commercial Division, under the KRS number 0000517804, NIP: 621-181-34-30 REGON: 302780961